How to Replace the Crankshaft Damper on All 1996 - 2000 Honda Civic LX / Del Sol 1.6L 4 Cyl Engines
Browse articles:
Auto Beauty Business Culture Dieting DIY Events Fashion Finance Food Freelancing Gardening Health Hobbies Home Internet Jobs Law Local Media Men's Health Mobile Nutrition Parenting Pets Pregnancy Products Psychology Real Estate Relationships Science Seniors Sports Technology Travel Wellness Women's Health
Browse companies:
Automotive Crafts, Hobbies & Gifts Department Stores Electronics & Wearables Fashion Food & Drink Health & Beauty Home & Garden Online Services & Software Sports & Outdoors Subscription Boxes Toys, Kids & Baby Travel & Events

How to Replace the Crankshaft Damper on All 1996 - 2000 Honda Civic LX / Del Sol 1.6L 4 Cyl Engines

In this repair guide, you will learn step-by-step the process of removing and installing a crankshaft damper on all 1996 - 2000 Honda Civic LX and del Sol 1.6L 4 cyl engines.

Removal & Installation

Fig. Exploded view of the crankshaft damper

Fig. Crankshaft damper and bolt

Fig. Crankshaft damper

To Remove:

  1. Note the radio security code and station presets.
  2. Disconnect the negative battery cable.
  3. Raise and safely support the vehicle.
  4. Remove the lower engine splash shield.
  5. Remove the engine accessory drive belts. (Mark the direction of the accessory drive belt's rotation if it is to be reinstalled. If there is any doubt about the condition of a belt, or if it has been contaminated by oil, it should be replaced.)
  6. Set the engine at Top Dead Center (TDC) for the No. 1 piston on the compression stroke. The crankshaft pulley white mark must be aligned with the mark on the lower timing cover. Once in this position, the engine must not be disturbed.
  7. Hold the crankshaft pulley with Honda Tool Nos. 07MAB-PY3010A Holder Attachment and 07JAB-001020A Holder Handle or their equivalents and remove the crankshaft pulley bolt by turning it in a counterclockwise direction.
  8. Remove the crankshaft pulley.

To Install:

  1. Install the crankshaft pulley. Retighten the crankshaft pulley bolt.
  2. Install and adjust the accessory drive belts.
  3. Verify that all engine components that may have been removed have been reinstalled correctly.
  4. Install the splash shield and lower the vehicle.
  5. Connect the negative battery cable.
  6. Enter the security code for the radio.

Related Articles

Additional resources:

Need an answer?
Get insightful answers from community-recommended
in Car Repairs on Knoji.
Would you recommend this author as an expert in Car Repairs?
You have 0 recommendations remaining to grant today.
Comments (0)