How to Replace the Flywheel / Flexplate on All 1996 - 2000 Honda Civic LX / Del Sol 1.6L 4 Cyl Engines
Browse articles:
Auto Beauty Business Culture Dieting DIY Events Fashion Finance Food Freelancing Gardening Health Hobbies Home Internet Jobs Law Local Media Men's Health Mobile Nutrition Parenting Pets Pregnancy Products Psychology Real Estate Relationships Science Seniors Sports Technology Travel Wellness Women's Health
Browse companies:
Automotive Crafts, Hobbies & Gifts Department Stores Electronics & Wearables Fashion Food & Drink Health & Beauty Home & Garden Online Services & Software Sports & Outdoors Subscription Boxes Toys, Kids & Baby Travel & Events

How to Replace the Flywheel / Flexplate on All 1996 - 2000 Honda Civic LX / Del Sol 1.6L 4 Cyl Engines

In this repair guide, you will learn step-by-step how to replace the flywheel / flexplate on all 1996 - 2000 Honda Civic LX / del Sol 1.6L 4 cyl engines.


Fig. View of the flywheel and bolts-manual transaxle shown

Fig. Removing the flywheel from a manual transaxle equipped model

The flywheel on manual transaxle cars serves as the forward clutch engagement surface. It also serves as the ring gear with which the starter pinion engages to crank the engine. The most common reason to replace the flywheel is broken teeth on the starter ring gear.

On automatic transaxle cars, the torque converter actually forms part of the flywheel. It is bolted to a thin flexplate which, in turn, is bolted to the crankshaft. The flexplate also serves as the ring gear with which the starter pinion engages in engine cranking. The flexplate occasionally cracks; the teeth on the ring gear may also break, especially if the starter is often engaged while the pinion is still spinning. The torque converter and flexplate are separated, so the converter and transaxle can be removed together.

To remove:

  1. Remove the transaxle from the vehicle.
  2. On vehicles equipped with a manual transaxle, remove the clutch assembly from the flywheel.
  3. Support the flywheel in a secure manner (the flywheel on manual transaxle-equipped vehicles can be heavy).
  4. Matchmark the flywheel/flexplate to the rear flange of the crankshaft.
  5. Remove the attaching bolts and pull the flywheel/flexplate from the crankshaft.

To install:

  1. Clean the flywheel/flexplate attaching bolts, the flywheel/flexplate and the rear crankshaft mounting flange.
  2. Position the flywheel/flexplate onto the crankshaft flange so that the matchmarks align.
  3. Coat the threads of the attaching bolts with Loctite® Thread Locker 271, or equivalent, to help ensure that the attaching bolts will not work loose. Install the bolts finger-tight.
  4. Tighten the attaching bolts in a crisscross fashion in 3 even steps to 68-70 ft. lbs. (92-95 Nm).
  5. For manual transaxle-equipped vehicles, install the clutch assembly.
  6. Install the transaxle

Related Articles

Additional resources:

Need an answer?
Get insightful answers from community-recommended
in Car Repairs on Knoji.
Would you recommend this author as an expert in Car Repairs?
You have 0 recommendations remaining to grant today.
Comments (0)